Care and Maintenance

KI products require minimal maintenance. Proper care and careful use are the best methods of maintaining the appearance, finish, and function of any product. Periodic inspection of the product is recommended. For any questions or inconsistencies, please contact KI Customer Service at 800.424.2432 or SalesOps@ki.com

  • Fabrics-Care--Maintenance

    Fabrics Care and Maintenance

    Item # KI-CM-000007

    The easiest way to determine the correct method for cleaning your upholstery fabric is to refer to its fabric cleaning code. You will need to know the fabric supplier and pattern name in order to obtain the code from their website, or through their customer service personnel. The KI fabric code can be found below the item number on the white product label. 

  • Glass-Finishes-Care--Maintenance

    Glass Care and Maintenance

    Item # KI-CM-000008

    For clear glass, clean using Windex® Original Glass Cleaner. For etched glass, clean using a clean, soft cloth rag soaked in water and wipe down etched glass. Allow water to evaporate.

  • Laminate-Finishes-Care--Maintenance

    Laminate Care and Maintenance

    Item # KI-CM-000009

    To clean, use a mild solution of water and detergent. Always rinse thoroughly with warm water and wipe clean with a dry cloth.

  • Markerboard-Laminate-Finishes-Care--Maintenance

    Markerboard Laminate Care and Maintenance

    Item # KI-CM-000010

    Markerboard laminate should be cleaned periodically to remove all dry ink residue and prevent ghosting. Ink should be completely dry before erasing, as attempting to erase wet ink can cause smearing and ghosting. Always use a dry eraser or a soft cloth to remove the marker. Remove residue with a soft cotton cloth and a mixture of warm water and mild detergent followed by a clean water rinse.

  • Membrane-Pressed-Surfaces-Finishes-Care--Maintenance

    Membrane Pressed Surfaces Care and Maintenance

    Item # KI-CM-000011

    To clean, use a mild solution of water and detergent. Always rinse thoroughly with warm water and wipe clean with a dry cloth.

  • Plastic-Finishes-Care--Maintenance

    Plastic Care and Maintenance

    Item # KI-CM-000012

    Clean frequently using a mild solution of warm water and detergent. Always rinse thoroughly with warm water and wipe clean with a dry, soft cloth.

  • Powder-Coated-Paint-Finishes-Care--Maintenance

    Powder-Coated Paint Care and Maintenance

    Item # KI-CM-000013

    It is recommended that frames and finished surfaces be kept dry and away from water, rain, ice, snow, salt, and direct sunlight. Clean using a mild solution of warm water and detergent. Always rinse thoroughly with warm water and wipe clean with a dry, soft cloth. Wax or furniture polish may be applied after cleaning.

  • Wood-Finishes-Care--Maintenance

    Wood Care and Maintenance

    Item # KI-CM-000014

    Regular cleaning or dusting can be accomplished using a slightly damp, soft, lint-free cloth wiping in the direction of the wood grain. Always wipe dry immediately with a dry, clean, lint-free cloth. Avoid using any cleaners containing abrasives or corrosive agents.

  • Architectural-Wall-Finishes-Care--Maintenance-1

    Architectural Walls Care and Maintenance

    Item # KI-CM-000001

    For glass panels, clean with warm water or a mild soap solution and a lint-free cloth (terry cloth). Conventional, non-abrasive glass cleaners may also be used except on sandblasted, etched or filmed glass. For fabric panels, refer to the associated fabric cleaning code.

  • Filing-Storage--Casegood-Systems-Finishes-Care--Maintenance

    Filing, Storage and Casegoods Care and Maintenance

    Item # KI-CM-000002

    Follow standard instructions for routine and spot cleaning. Cleaning agents and disinfectants should be approved by the appropriate department(s) within the facility.